you should be able to get it out... but I doubt that puller will do it....

I normally find a big socket about the same size as the outside of the bush (metal bit) and then bray the crap out of it with a big hammer...

the problem is youll only be able to get the puller onto the bit thats sticking out... which is only joined to the rubber... you need something on the steel surround of the rubber (forgotten what this bit is called...)

Im guessing thats the back axle on the metro ?  how hard is it to drop the whole thing out ?

if its stuck that hard you really need the frame up against something hard (like a concrete floor) while you bray away at it from above.... so that the frame cant move at all... a tiny bit of movement at you lose nearly all the force youre hitting it with

if its still stuck you need to take it to a garage with a hydraulic press and see if they can get it out for you....  theyll probably only charge you a tenner for both sides... (did for me last time i had something like this done...) but I gave them 20 and told them to get a drink on me.... always handy if you need to go back some time and they remember you

burn the rubber out with acetylene torch if its too hard to get out

going to get some threaded bar and some big washers and nuts, make my own tool.

Cant see owt wrong with them, and removing them wont show any more than you can already see.
Id have air chiseled them out.

I could be wrong, but I thought the round metal bit which the ruber is bonded too (the bit I[ve forgotern the name of) is part of it and should be comming out too ?